BallisticApp Get it on Google Play
Lapua · Hunting

6.5×55 Swedish loaded with the 6.5 g (100 gr) FMJ bullet

0.250BC (G1)
100.0gr6.48 g
830m/s2723 fps
2232J1646 ft·lb
ManufacturerLapua
Calibre6.72 mm (.265")
Bullet weight100.0 gr  ·  6.48 g
Ballistic coefficient G10.250
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity830.0 m/s  ·  2723 fps
Muzzle energy2232 J  ·  1646 ft·lb
Sectional density0.204
Form factori1 0.816
CategoryHunting
SourceLapua website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 2232 J (1646 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.204 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 187 loads of this bore diameter in the database, this one's G1 BC of 0.250 is higher than 38 of them.

Similar 6.72 mm (.265") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play