BallisticApp Get it on Google Play
Sellier & Bellot · Rifle

222 REM. FMJ 50 gr (Rifle ammunition FMJ)

0.114BC (G7)
50.0gr3.24 g
970m/s3182 fps
1524J1124 ft·lb
ManufacturerSellier & Bellot
Calibre5.70 mm (.224")
Bullet weight50.0 gr  ·  3.24 g
Ballistic coefficient G10.235
Ballistic coefficient G70.114
Drag model usedG7
Muzzle velocity970.0 m/s  ·  3182 fps
Muzzle energy1524 J  ·  1124 ft·lb
Sectional density0.142
Form factori7 1.244  ·  i1 0.604
CategoryRifle
SourceSellier & Bellot website 2026-07-02 (verified)

Reading these numbers

Both a G1 and a G7 ballistic coefficient are published for this bullet. BallisticApp defaults to G7, because the G7 standard projectile is shaped like a modern boat-tail bullet and holds its coefficient far more steadily across the transonic range than G1 does.

Muzzle energy of 1524 J (1124 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.142 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 206 loads of this bore diameter in the database, this one's G7 BC of 0.114 is higher than 16 of them.

Similar 5.70 mm (.224") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play