BallisticApp Get it on Google Play
Federal · Hunting

Federal Subsonic, 45-70 Government, 300 Grain, Target Soft Point, 1000 fps

0.290BC (G1)
300.0gr19.44 g
305m/s1000 fps
903J666 ft·lb
ManufacturerFederal
Calibre11.63 mm (.458")
Bullet weight300.0 gr  ·  19.44 g
Ballistic coefficient G10.290
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity304.8 m/s  ·  1000 fps
Muzzle energy903 J  ·  666 ft·lb
Sectional density0.204
Form factori1 0.705
CategoryHunting
SourceFederal website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 903 J (666 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.204 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 42 loads of this bore diameter in the database, this one's G1 BC of 0.290 is higher than 29 of them.

Similar 11.63 mm (.458") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play