BallisticApp Get it on Google Play
Federal · Hunting

Power-Shok Copper Rifle, 30-06 Springfield, 150 Grain, Copper HP, 2910 fps

0.278BC (G1)
150.0gr9.72 g
887m/s2910 fps
3824J2820 ft·lb
ManufacturerFederal
Calibre7.82 mm (.308")
Bullet weight150.0 gr  ·  9.72 g
Ballistic coefficient G10.278
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity887.0 m/s  ·  2910 fps
Muzzle energy3824 J  ·  2820 ft·lb
Sectional density0.226
Form factori1 0.813
CategoryHunting
SourceFederal website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 3824 J (2820 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.226 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 488 loads of this bore diameter in the database, this one's G1 BC of 0.278 is higher than 150 of them.

Similar 7.82 mm (.308") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play