BallisticApp Get it on Google Play
Federal · Magnum

Trophy Copper, 300 Win Mag, 165 Grain, Trophy Copper, 3050 fps

0.503BC (G1)
165.0gr10.69 g
930m/s3050 fps
4620J3407 ft·lb
ManufacturerFederal
Calibre7.82 mm (.308")
Bullet weight165.0 gr  ·  10.69 g
Ballistic coefficient G10.503
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity929.6 m/s  ·  3050 fps
Muzzle energy4620 J  ·  3407 ft·lb
Sectional density0.249
Form factori1 0.494
CategoryMagnum
SourceFederal website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 4620 J (3407 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.249 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 488 loads of this bore diameter in the database, this one's G1 BC of 0.503 is higher than 443 of them.

Similar 7.82 mm (.308") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play