BallisticApp Get it on Google Play
GECO · Rifle

GECO DTX .223 Rem. 3,6g

0.302BC (G1)
55.0gr3.56 g
963m/s3159 fps
1653J1219 ft·lb
ManufacturerGECO
Calibre5.70 mm (.224")
Bullet weight55.0 gr  ·  3.56 g
Ballistic coefficient G10.302
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity963.0 m/s  ·  3159 fps
Muzzle energy1653 J  ·  1219 ft·lb
Sectional density0.156
Form factori1 0.517
CategoryRifle
SourceGECO website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 1653 J (1219 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.156 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 206 loads of this bore diameter in the database, this one's G1 BC of 0.302 is higher than 184 of them.

Similar 5.70 mm (.224") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play