BallisticApp Get it on Google Play
GECO · Rifle

GECO TARGET HP .223 Rem. 3,4g

0.195BC (G1)
52.0gr3.37 g
960m/s3150 fps
1553J1145 ft·lb
ManufacturerGECO
Calibre5.70 mm (.224")
Bullet weight52.0 gr  ·  3.37 g
Ballistic coefficient G10.195
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity960.0 m/s  ·  3150 fps
Muzzle energy1553 J  ·  1145 ft·lb
Sectional density0.148
Form factori1 0.756
CategoryRifle
SourceGECO website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 1553 J (1145 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.148 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 206 loads of this bore diameter in the database, this one's G1 BC of 0.195 is higher than 79 of them.

Similar 5.70 mm (.224") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play