BallisticApp Get it on Google Play
Hornady · Rifle

223 Rem 35 gr NTX® Superformance®

0.177BC (G1)
35.0gr2.27 g
1219m/s4000 fps
1686J1243 ft·lb
ManufacturerHornady
Calibre5.70 mm (.224")
Bullet weight35.0 gr  ·  2.27 g
Ballistic coefficient G10.177
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity1219.2 m/s  ·  4000 fps
Muzzle energy1686 J  ·  1243 ft·lb
Sectional density0.099
Form factori1 0.561
CategoryRifle
SourceHornady website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 1686 J (1243 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.099 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 206 loads of this bore diameter in the database, this one's G1 BC of 0.177 is higher than 63 of them.

Similar 5.70 mm (.224") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play