BallisticApp Get it on Google Play
Hornady · Rifle

5.56 NATO 68 gr BTHP Match™ Frontier®

0.355BC (G1)
68.0gr4.41 g
902m/s2960 fps
1793J1323 ft·lb
ManufacturerHornady
Calibre5.70 mm (.224")
Bullet weight68.0 gr  ·  4.41 g
Ballistic coefficient G10.355
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity902.2 m/s  ·  2960 fps
Muzzle energy1793 J  ·  1323 ft·lb
Sectional density0.193
Form factori1 0.543
CategoryRifle
SourceHornady website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 1793 J (1323 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.193 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 206 loads of this bore diameter in the database, this one's G1 BC of 0.355 is higher than 190 of them.

Similar 5.70 mm (.224") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play