BallisticApp Get it on Google Play
Hornady · Rifle

7.62x39 123 gr SST® Hornady BLACK®

0.295BC (G1)
123.0gr7.97 g
716m/s2350 fps
2045J1508 ft·lb
ManufacturerHornady
Calibre7.92 mm (.312")
Bullet weight123.0 gr  ·  7.97 g
Ballistic coefficient G10.295
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity716.3 m/s  ·  2350 fps
Muzzle energy2045 J  ·  1508 ft·lb
Sectional density0.181
Form factori1 0.613
CategoryRifle
SourceHornady website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 2045 J (1508 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.181 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 17 loads of this bore diameter in the database, this one's G1 BC of 0.295 is higher than 13 of them.

Similar 7.92 mm (.312") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play