BallisticApp Get it on Google Play
Hornady · Hunting

9.3X62 286 gr InterLock® SP‑RP

0.400BC (G1)
286.0gr18.53 g
719m/s2360 fps
4794J3536 ft·lb
ManufacturerHornady
Calibre9.30 mm (.366")
Bullet weight286.0 gr  ·  18.53 g
Ballistic coefficient G10.400
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity719.3 m/s  ·  2360 fps
Muzzle energy4794 J  ·  3536 ft·lb
Sectional density0.305
Form factori1 0.762
CategoryHunting
SourceHornady website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 4794 J (3536 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.305 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 40 loads of this bore diameter in the database, this one's G1 BC of 0.400 is higher than 36 of them.

Similar 9.30 mm (.366") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play