SAKO · Rifle

SAKO Monolithic Series 6,5 Creedmoor 8 g / 123 gr

0.431BC (G1)

123.0gr7.97 g

875m/s2871 fps

3051J2250 ft·lb

Manufacturer	SAKO
Calibre	6.72 mm (.265")
Bullet weight	123.0 gr · 7.97 g
Ballistic coefficient G1	0.431
Ballistic coefficient G7	not published
Drag model used	G1
Muzzle velocity	875.0 m/s · 2871 fps
Muzzle energy	3051 J · 2250 ft·lb
Sectional density	0.251
Form factor	i1 0.582
Category	Rifle
Source	SAKO website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 3051 J (2250 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.251 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 187 loads of this bore diameter in the database, this one's G1 BC of 0.431 is higher than 119 of them.

Similar 6.72 mm (.265") loads

6.5 Grendel 123 gr ELD® Match™ Hornady BLACK®123 gr · BC 0.255 · 786 m/s 6.5 Grendel 123 gr FMJ Frontier®123 gr · BC 0.420 · 786 m/s 6.5 Grendel 123 gr SST®123 gr · BC 0.510 · 786 m/s The 6.5 Creedmoor factory-loaded with the 8.0 g (123 gr) Scenar match bullet123 gr · BC 0.263 · 850 m/s The factory-loaded 6.5×47 Lapua with the 8.0 g (123 gr) Scenar OTM projectile123 gr · BC 0.263 · 850 m/s 6.5×55 Swedish loaded with the 8.0 g (123 gr) Scenar OTM123 gr · BC 0.263 · 830 m/s

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play