BallisticApp Get it on Google Play
SAKO · Hunting

SAKO Monolithic Series 7,62 x 53 R 10.5 g / 162 gr

0.416BC (G1)
162.0gr10.50 g
780m/s2559 fps
3193J2355 ft·lb
ManufacturerSAKO
Calibre7.85 mm (.309")
Bullet weight162.0 gr  ·  10.50 g
Ballistic coefficient G10.416
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity780.0 m/s  ·  2559 fps
Muzzle energy3193 J  ·  2355 ft·lb
Sectional density0.242
Form factori1 0.582
CategoryHunting
SourceSAKO website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 3193 J (2355 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.242 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 8 loads of this bore diameter in the database, this one's G1 BC of 0.416 is higher than 7 of them.

Similar 7.85 mm (.309") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play