BallisticApp Get it on Google Play
SAKO · Rifle

SAKO Rapid Expansion Series 22-250 Rem. 3.2 g / 49 gr

0.248BC (G1)
49.0gr3.18 g
1140m/s3740 fps
2063J1522 ft·lb
ManufacturerSAKO
Calibre5.70 mm (.224")
Bullet weight49.0 gr  ·  3.18 g
Ballistic coefficient G10.248
Ballistic coefficient G7not published
Drag model usedG1
Muzzle velocity1140.0 m/s  ·  3740 fps
Muzzle energy2063 J  ·  1522 ft·lb
Sectional density0.139
Form factori1 0.560
CategoryRifle
SourceSAKO website 2026-07-02 (verified)

Reading these numbers

Only a G1 ballistic coefficient is published for this load, so BallisticApp solves it against the G1 drag table. G1 BC drifts with velocity — the figure below is valid near the muzzle and drops off as the bullet slows.

Muzzle energy of 2063 J (1522 ft·lb) is computed from the bullet weight and muzzle velocity above, not quoted from the catalogue. Sectional density 0.139 describes weight per unit of frontal area; divided by the ballistic coefficient it gives the form factor, which is how much drag the shape adds over the standard projectile.

Among the 206 loads of this bore diameter in the database, this one's G1 BC of 0.248 is higher than 129 of them.

Similar 5.70 mm (.224") loads

Turn this into a drop table for your rifle.

These figures are the bullet's starting point. What you actually dial depends on your rifle's zero, the air you're shooting in and the wind on the day — BallisticApp solves that on the phone, offline, using the same G1/G7 tables and this database.

Get it on Google Play